Aries-automotive B35-2001 Bedienungsanleitung PDF herunterladen

/ 2001-07 SEQUOIA

1999-06 TUNDRA

B35-2001 / 35-2001 INSTRUCTION SHEET

BULL BAR

QTY.

ITEM CONTENT

1 1 BULL BAR

2 2 BRACKETS-PASSENGER & DRIVER SIDE

4 3 RUBBER BUMPER

2 4 1/2 -13 X 2.00” HEX HEAD BOLT

4 5 ½” FLAT WASHERS

2 6 ½” LOCK WASHERS

2 7 M12-1.25 X 30MM HEX HEAD BOLT

STEP 1 REMOVE CONTENTS FROM BOX AND VERIFY ALL PART ARE PRESENT. READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.

STEP 2 IT MAY BE NECESSARY TO REMOVE/RELOCATE FRONT LICENSE PLATE AND LICENSE PLATE BRACKET. IT IS NOT REQUIRED, BUT

SRONGLY RECOMMENDED.

STEP 3 DETERMINE PASSENGER AND DRIVER BRACKETS. SEE FIGURE 1. REMOVE AND DISCARD TIE DOWN LOOP AND TOW HOOK, (SAVE

SHORTER 12MM FASTNERS). ATTACH BRACEKTS USING SHORTER EXISTING FASTENERS AND SUPPLIED 12MM BOLTS AS SHOWN. LEAVE

LOOSE.

STEP 4 ATTACH BULL BAR TO BRACKETS USING ½” FASTENERS AS SHOWN. LEVEL AND ADJUST BULL BAR AS DESIRED. TORQUE ALL

FASTENERS TO 65 FT.LBS.

FINISH PROTECTION- ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY OTHER HIGH FINISH PRODUCT

ON THE VEHICLE. PROTECT THE FINISH WITH A NON-ABRASIVE AUTOMOTIVE WAX. THE USE OF SOAP, POLISH, OR WAX THAT CONTAINS

ABRASIVES IS DETRIMENTAL, AS THE COMPOUNDS SCRATCH THE FINISH AND OPEN IT TO CORROSION.

DISCLAIMER- BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER FROM THE INSTALLATION AND USE OF ARIES

PRODUCTS. ARIES PRODUCTS ARE SOLD AS DECORATIVE ACCESSORIES AND SHOULD NOT BE RELIED UPON AS

PROTECTION FOR THE VEHICLE OR OCCUPANTS IN THE EVENT OF A COLLISION OR ROLL OVER. ARIES AUTOMOTIVE

ASSUMES NO LIABILITY FOR INJURY, LOSS, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN THE EVENT OF A COLLISION OR

ROLLOVER.

1 2

Seite 1

/ 2001-07 SEQUOIA1999-06 TUNDRA B35-2001 / 35-2001 INSTRUCTION SHEET BULL BAR QTY. ITEM CONTENT 1 1 BULL BAR 2 2 BRACKETS-PASSENGE

B35-2001 / 35-2001

Keine Kommentare

Aries-automotive B35-2001 Bedienungsanleitung