Aries-automotive B35-5000 Bedienungsanleitung PDF herunterladen

BULL BAR

94-01 DODGE RAM

Page 1 of 2 3/30/10 Rev1(DP)

35-5000/B35-0000

PARTS LIST:

Qty Description Qty Description

1 Bull Bar 10 12mm Lock Washers

2 Frame Mounting Brackets 20 12mm x 32mm OD x 3mm Flat Washers

2 12-1.75mm x 100mm Hex Bolts 10 12-1.75mm Hex Nuts

8 12-1.75mm x 30mm Hex Bolts

PROCEDURE:

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. CUTTING IS REQUIRED. ASSISTANCE IS

RECOMMENDED. It may be necessary to remove/relocate front license plate and license plate

bracket. It is not required, but strongly recommended. If local/state law requires a front license plate,

a license plate relocation kit is available.

1. Starting under the driver side of the front bumper, hold (1) Frame Mounting Bracket in

approximate position to determine the mounting location. Locate the (2) holes in the frame

between the body mount brackets. NOTE: Remove factory hex bolts (if supplied) and save for re-

installation. On some models, the hex nuts inside the frame rail may also need to be removed.

2. Bolt the Mounting Bracket into position with (2) 12mm x 30mm Hex Bolts, (4) 12mm Flat Washers,

(2) 12mm Lock Washers and (2) 12mm Hex Nuts in the top (2) mounting holes or use the factory

hardware removed in Step 1. Next, insert (1) 12mm x 100mm Hex Bolt, (2) 12mm Flat Washers,

(1) 12mm Lock Washer and (1) 12mm Hex Nut in the center mounting hole. Snug but do not

tighten hardware at this time. Repeat Steps 2 & 3 for passenger side Mounting Bracket

installation.

(2) 12mm x 30mm Hex Bolts

(4) 12mm Flat Washers

(2) 12mm Lock Washers

(2) 12mm Hex Nuts

(1) 12mm x 100mm Hex Bolt

(2) 12mm Flat Washers

(1) 12mm Lock Washer

(1) 12mm Hex Nut

Top Bolts (2) in Bracket

(2) 12mm x 30mm Hex Bolts

(4) 12mm Flat Washers

(2) 12mm Lock Washers

(2) 12mm Hex Nuts

(or use factory hardware if

equipped)

1 2

BULL BAR 2
94-01 DODGE RAM 2

Inhaltsverzeichnis

Seite 1

BULL BAR 94-01 DODGE RAM Page 1 of 2 3/30/10 Rev1(DP) 35-5000/B35-0000 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock W

Seite 2 - 94-01 DODGE RAM

BULL BAR 94-01 DODGE RAM Page 2 of 2 3/30/10 Rev1(DP) 3. Remove the air dam from the bottom of the bumper and move it to a clean stable work area.

Kommentare zu diesen Handbüchern

Keine Kommentare

Aries-automotive B35-5000 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Aries-automotive B35-5000 herunter. Aries Automotive B35-5000 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Aries-automotive B35-5000