Aries-automotive 202015-2 Bedienungsanleitung PDF herunterladen

10mm x 24mm OD x 2mm Flat Washers

10mm Lock Washers

10-1.25mm x 25mm Hex Bolts

12-1.75mm x 43mm Bolt Plate

(2) 12mm x 43mm

Page 1 of 4

PARTS LIST:

1 Driver/Left Sidebar 2 12mm x 32mm OD x 3mm Flat Washers

1 Passenger/Right Sidebar 2 12mm Lock Washers

1 Driver/Left Front Mounting Bracket 2 12mm Hex Nuts

1 Passenger/Right Front Mounting Bracket 8

1 Driver/Left Rear Mounting Bracket 8

1 Passenger/Right Rear Mounting Bracket 8

2 90mm x 40mm Spacers (Use on 2011 & 12 Front Bracket Only) 2 6mm Nut Plate

100mm x 70mm Spacers (Use on 2011 & 12 Rear Bracket Only) 2 6-1.0mm x 30mm Hex Bolts

2 12mm Oversize Hex Nuts (Tall) 2 6mm x 18mm OD x 1.6mm Flat Washers

2 2 6mm Lock Washers

2 12-1.75mm x 90mm Bolt Plate

Rear Bra

cket

Spacer (use

on 2011 &12

vehicles only)

Rear Bracket

Spacer (use

on 2011 & 12

vehicles only)

(2) 12mm x 90mm Bolt Plates

(2) 1

2mm Oversized

(Tall) Hex Nuts

Passeng

er/Right

Rear Mounting

Bracket

Driver/Left Rear

Mounting

Bracket

Bolt Plates

(2) 6m

m Nut Plates

Front Brac

ket

Spacers

Passeng

er/Right Front

Mounting Bracket

Driver/Left Front

Mounting Bracket

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. CUTTING IS REQUIRED.

2. NOTE: Determine if the vehicle is equipped with factory mud flaps. Sidebar installation may not be

compatible with factory mud flaps.

3. Start installation under the driver side of the vehicle. Remove the front and middle section of the plastic

splash guard, (Figures 1A, 1B & 2). Place the splash guard on a clean, stable work surface. Use a

hack saw or utility knife to cut out an opening 2” x 3-1/2” on the middle splash guard as pictured. Cut a

1-1/2” x 1-1/2” opening in the front guard as indicated in Figure 2. Reinstall the splash guards using the

factory fasteners. NOTE: Hold Brackets in position on vehicle to determine area necessary to cut from

splash guards.

Driver/Left Sidebar Illustrated

Front

Use on 2011 & 12 vehicles only

INSTALLATION INSTRUCTIONS

2008-12 TOYOTA HIGHLANDER / HIGHLANDER HYBIRD

PART# 202015 / 202015-2

1 2 3 4

INSTALLATION INSTRUCTIONS 1
Cut Here 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

10mm x 24mm OD x 2mm Flat Washers 10mm Lock Washers 10-1.25mm x 25mm Hex Bolts 12-1.75mm x 43mm Bolt Plate (2) 12mm x 43mm 4

Seite 2 - Cut Here

Hex Bolts, (4) 10mm Lock Washers and (4) 10mm Flat Washers to attach the Sidebar to the Mounting ounting Brackets. Use the included (4) 10mm x 25mm :

Seite 3

Page 3 of 4 Driver Side Installation Pictured F

Seite 4

for 2011 & 12 Only 2 per side Page 4 of 4 Driver S

Verwandte Modelle: 202015

Kommentare zu diesen Handbüchern

Keine Kommentare

Aries-automotive 202015-2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Aries-automotive 202015-2 herunter. Aries Automotive 202015-2 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 202015

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Aries-automotive 202015-2